WHAT IS EPO-VELOX LE-F - Low Viscosity - Fast Epoxy
EPO-VELOX LE-FH (LOW VISCOSITY - FAST) HARDENER
EPO-VELOX LV-H - is triethylenetetramine amines which are unmodified aliphatic. They are used in a variety of applications including epoxy curing agents. Due to their tendency to form complexes with atmospheric carbon dioxide, particularly in humid conditions, they are most often formulated, adducted or otherwise reacted to inhibit amine blush. Some of the benefits of TETA curing agents is being a member of the ethylene amine family, they lend themselves to a wide variety of chemical reactions and end-use applications.
EPO-VELOX LE-FR (LOW EXOTHERM - FAST) - RESIN
EPO-VELOX F-R - possess unusually low exotherm temperatures in comparison to conventional epoxy systems of similar reactivity and is a low viscosity resin displaying exceptionally rapid reaction rates with an aliphatic amine curing agents over a broad temperature range while providing performance levels roughly equivalent to basic liquid epoxy resins. This resin system is characterized by hard, tough cures exhibiting mechanical, electrical, and water resistance properties similar to those normally expected from conventional liquid epoxy resins.
POT TIME 2.5 MINUTES
SAMPLE ON 1.5" DIAMETER COMPLETED IN 35 MINUTES
RATIOS CAN BE USED AS FOLLOWS
PARTS BY WEIGHT
- RATIO SET TO 100 PARTS RESIN
- RATIO SET TO 17 PARTS HARDENER
TESTED WITH SEVERAL RATIOS AS FOLLOWS
25 PARTS : 5 PARTS SHORE D 86
25 PARTS : 4.5 PARTS SHORE D 85
25 PARTS : 4 PARTS SHORE D 84