MWC-COOL is a sample dryer
This sample blow dryer is the equipment for the sample to be dried and cured.
Built-in fan that heats the airflow to 90 o C with a 2000/1500W power-adjustable heating unit .
The operation is simple and convenient, the air flow is adjustable, the cold air, the low hot air, and the high hot air type can be changed.
The sample stage is made of 140*190mm stainless steel and can dry up to 24 samples of 30mm diameter at a time.
The contact between the sample stage and the air outlet is specially raised to prevent moisture from flowing back into the fan.
This machine can also be used to shorten the curing time of cold-set samples and stabilize the sample temperature in a suitable state. Hot air promotes the start of the reaction, and once the reaction begins, cold air is required to promote cooling.
|Heating Unit Power||2000W/1500W|
|Power Cord Length||3.36ft|
|Sample Stage||140*190mm stainless steel|
|Capacity||can dry up to 24 samples of 30mm diameter at a time|
|Air Flow Is Adjustable||Cold, low heat, high heat|
|Air Speed||High and low adjustable|
|Power Supply||AC220V 50IIZ|
|Dimensions||410X 350X 200mm|
There are no downloads.