My cart

0 item(s) - $0.00

  • Your shopping cart is empty!

Diamond Indentors by Metallurgical Supplies

  1. Microhardness Diamond Indenters
    1. Knoop microhardness diamond indenters are calibrated to meet and exceed American and International standards in our ISO/ IEC 17025 accredited laboratory and are certified to meet the requirements of ASTM E 384.
    2. Vickers microhardness diamond indenters are calibrated to meet and exceed American and International standards in our ISO/ IEC 17025 accredited laboratory and are certified to meet the requirements of ASTM E 384

  1. Rockwell Diamond Indenters
    1. Rockwell “Long Life” diamond indenters and ball penetrators are calibrated to meet and exceed American and International standards in our ISO/ IEC 17025 accredited laboratory.

    1. It is critical to have a precise and accurate indenter configuration for reliable and dependable Rockwell® hardness testing. A minor deviation in the form of flats, peaks or poor surface finish from the true contour (120˚ including angle, 0.2 mm radius) will result in inaccurate and unreliable hardness readings.

    1. To minimize diamond breakage, we use only the highest quality industrial diamonds. Each Rockwell diamond indenter is ground, lapped and hand polished to control the conical angle to 120° ±0.35°. In order to prevent shift under test loads, the diamond is precisely positioned and then sintered in place. All Rockwell diamond indenters are performance-tested on a master Rockwell hardness tester in our environmentally controlled ISO 17025 standardizing laboratory.

    1. To accommodate special hardness testing needs, Rockwell diamond indenters are manufactured in several different diamond mounting configurations. Although the diamond dimensions never change, the design of the mount may limit the load that can be applied. I.E. Carbide diamond indenters are limited to a maximum load of 60 kgf.

    1. Indenters identified by C or A indicates that the indenter has been performance tested at the specific scale associated with the Rockwell scale the letter identifies. Indenters marked ‘N’ indicate that it is used for superficial testing only with loads up to and including 45 kgf N. Rockwell diamond indenters identified for ‘high temperature use’ have bodies made from Tungsten carbide steel and are manufactured to withstand temperatures up to 1500°F . They are available in A, C and N scales. High temperature diamond indenters must be used in a non-oxygen atmosphere.
Diamond Indentors - Quality Supplies for Metlab's Diamond Indentors - by Metallurgical Supplies a Metallography World Corporation
Grid View:
Quickview

A Scale Carbide Indentron Penetrator

(0)

A Scale Carbide Indentron Penetrator..

Quickview

A Scale Carbide Penetrator

(0)

A Scale Carbide Penetrator..

Quickview

Ames HRC Penetrator

(0)

Ames HRC Penetrator..

Quickview

Ames HRC Penetrator

(0)

Ames HRC Penetrator..

Quickview

Ames HRN Penetrator

(0)

Ames HRN Penetrator..

Quickview

Ames HRN Penetrator

(0)

Ames HRN Penetrator..

Quickview

C Scale Grade B Carbide Indentron Penetrator

(0)

C Scale Grade B Carbide Indentron Penetrator..

Quickview

C Scale Grade B Penetrator Certified-Versitron

(0)

C Scale Grade B Penetrator Certified-Versitron..

Quickview

C Scale Grade B Tapered Penetrator Certified-Versitron

(0)

C Scale Grade B Tapered Penetrator Certified-Versitron..

Quickview

C Scale Tapered Chinese

(0)

C Scale Tapered Chinese..

Quickview

C,A,D Scale Grade A Indentron Penetrator

(0)

C,A,D Scale Grade A Indentron Penetrator..

Quickview

C,A,D Scale Grade A Regular Penetrator Certified

(0)

C,A,D Scale Grade A Regular Penetrator Certified..

Showing 1 to 12 of 39 (4 Pages)