META-HOT S1-DA   Fully Automatic Touch Screen Hot Mounting Press - META-HOT S1-DA by Metallurgical Supplies

META-HOT S1-DA Fully Automatic Touch Screen Hot Mounting Press - META-HOT S1-DA by Metallurgical Supplies

Product Code: META-HOT S1-DA
Availability: 1000
Viewed

There are no downloads.

Product Description

META-HOT-S1-DA Fully Automatic Touch Screen Hot Mounting Press

META-HOT S1-DA is an Automatic Mounting Press with one cylinder has a solid, easy-to-use, robust design. With a 360° heating element intimately connected to the mold, heating is very efficient. Fully automatic operation with microprocessor controls, electro-hydraulic pressure (requires no air) the requirement to continually monitor and increase the force as the resin begins to melt is eliminated. With a touch panel screen for easy programming then saving your procedures to load for the next run faster. The unit comes with a mold assembly that can be easily changed into different sizes. This unit comes with all 4 mold assemblies, 25mm, 30mm, 40mm, 50mm (if inches are needed, please request when requiring a quote)
The unit requires a water source that will plug into the back of the machine for it to use during the cooling process of the procedure. With an intermediate ram allowing you to make 2 mounts per run. An intermediate ram is included with all 4 assemblies.

Model

META-HOT S1-DA

Sample diameter

25mm, 30mm, 40mm, 50mm

Display

Touch Panel for easy programming

Thermoforming Ranges

194-374(°F)    (90-190°C)

Cooling temperature range

 68-194 (°F)    (20 -90°C)

Holding time range

10-2999 Seconds

Cooling mode

Water Cooling

Heating power

1600 watts

System pressure range

0-145psi  (0-1 Mpa)

Input Voltage

110V 50/60Hz

Dimension

700mm x 550mm x 515mm

Net Weight

242klbs   (110kg)








Write a review

Note: HTML is not translated!
    Bad           Good