• MS-CUT-10S -  IRREGULAR SHAPE SAMPLE CUTTING MACHINE MS-CUT-10S -  IRREGULAR SHAPE SAMPLE CUTTING MACHINE

MS-CUT-10S - IRREGULAR SHAPE SAMPLE CUTTING MACHINE

$0.00
Product Code: MS-CUT-10S
Availability: 1000

OverView

MS-CUT-10S IRREGULAR SHAPE SAMPLE CUTT...
Get 3% OFF on your purchase! Like, Share, Tweet or Follow us and get Discount!
File Name Date Modified Link
SDS-Black-Epoxy-Powder-Course-Fine-Metallurgical-Supplies (Total downloads: 3) 15/05/2018 Log in
SDS-Dia-Lube-Suspensions-Metallurgical-Supplies (Total downloads: 4) 15/05/2018 Log in
Showing 1 to 2 of 2 (1 pages)

Enquiry Form

Product Description

MS-CUT-10S IRREGULAR SHAPE SAMPLE CUTTING MACHINE

MS-CUT 10S This machine is suitable for cutting the general metallographic sample color, to observe the material gold Phase, lithifies. Using a double-shell fully enclosed structure. Can guarantee absolute safety state for sample cutting. The unit is equipped with a strong cooling system. Use configuration of the coolant can take away the heat generated when cutting, to avoid the sample overheating and burning injury sample organization. This machine is used for cutting the metallographic specimens with irregular shapes such as a cylinder, polygon etc., to observe the metallographic and lithifies structure of the material. It adopts the fully-sealed structure with double shields, which can guarantee the safety of the operator. The cooling system with good coolant can take away the heat of cutting to protect the structure of specimen from being burned. During cutting, the specimen can be adjusted in any angles, which helps to avoid the minor burning when the specimen is cut to fall. At the same time the cutting cross-section is increased, thus the utilization ratio of cutting sand wheel is improved. The sample may be cut at the time

Features

Max. Cutting diameter: Ø65mm
Rotating speed: 2800 rpm
Diameter of cutting disc: 250 x 2 x 32 mm
Power supply: three phases, 220V, 50Hz, 3-phase
Motor: 1.6 KW
Dimensions: 990mm x610mm x1300mm
Net weight: 230 KG

 

Model Type:

MS-CUT-10S

MS-CUT-10SA

Diameter of cutting disc:

250mm

250mm

Power Input

220V, 60Hz, 3 phase

220V, 60Hz, 3 phase

Spindle Speed

2800rpm

2800rpm

Wheel Support

250mm x 1.5 x 32mm

250mm x 1.5 x 32mm

Max Cutting Diameter

65mm

65mm

Motor Power

1.6Kw

1.6Kw

Dimensions

990mm x610mm x1300mm

990mm x610mm x1300mm

 
 
 

Write a review

Note: HTML is not translated!
    Bad           Good

Enquiry Form

Upsell - Detail