Rockwell Hardness Test Blocks

  1. Rockwell Test Blocks
    1. Rockwell hardness testing is a fast and inexpensive test. The simplicity in the operation of a Rockwell hardness testing machine provides the added advantage that Rockwell hardness testing does not generally require a highly skilled operator to perform. The test is useful for material selection, for process and quality control, and for acceptance testing of commercial products. Rockwell hardness scales are divided into two categories: regular Rockwell scales and superficial Rockwell scales. Both categories of tests use the same types of indenters

    1. The regular Rockwell hardness testing scales use heavier force (load) levels. For these scales, the preliminary force (minor load) level is 10 kgf and the standard total force (load) levels may be 60 kgf, 100 kgf or 150 kgf. The superficial Rockwell hardness testing scales use lighter force (load) levels, typically for use on thinner materials. For the superficial Rockwell scales, the preliminary force (load) level is 3 kgf and the standard total force (load) levels may be 15 kgf, 30 kgf or 45 kgf.

    1. The Rockwell hardness test method consists of indenting the test material with a diamond cone or hardened steel ball indenter. The indenter is forced into the test material under a preliminary minor load F0 (Fig. 1A) usually 10 kgf. When equilibrium has been reached, an indicating device, which follows the movements of the indenter and so responds to changes in depth of penetration of the indenter is set to a datum position. While the preliminary minor load is still applied an additional major load is applied with resulting increase in penetration (Fig. 1B). When equilibrium has again been reach, the additional major load is removed but the preliminary minor load is still maintained. Removal of the additional major load allows a partial recovery, so reducing the depth of penetration (Fig. 1C). The permanent increase in depth of penetration, resulting from the application and removal of the additional major load is used to calculate the Rockwell hardness number.

Rockwell Test Block

      1. Calibrated to ASTM E18, ANSI (NCSL) Z540-1, (ISO) 10012-1, ISO/IEC 17025, ISO 6508
      2. Lifetime Guarantee
      3. Highest quality steel, brass and aluminum
      4. Rockwell test block surface hand lapped and diamond polished to a mirror finish
      5. Superior accuracy and ease of testing for the operator
      6. Special heat treat process insures maximum consistency and repeatability
      7. Rockwell Test Blocks are certified in our ISO/IEC 17025 accredited laboratory
      8. In stock for immediate delivery
      9. Free NIST traceable long form certificate with every Rockwell test block

 

Grid View:
Quickview

A Scale, Steel, Rockwell Regular Hardness Test Block

$60.00

A Scale, Steel, Rockwell Regular Hardness Test Block, Used with Penetrator C Diamond, with Load of 6..

Quickview

A Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

A Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator C Diamond, with Load of 6..

Quickview

A Scale, Carbide, Rockwell Regular Hardness Test Block

$60.00

A Scale, Carbide, Rockwell Regular Hardness Test Block, Used with Penetrator A Diamond (Carbide), wi..

Quickview

B Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

B Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/16 Ball, with Load of 1..

Quickview

B Scale, Steel, Rockwell Regular Hardness Test Block

$60.00

B Scale, Steel, Rockwell Regular Hardness Test Block, Used with Penetrator 1/16 Ball, with Load of 1..

Quickview

C Scale, Steel, Rockwell Regular Hardness Test Block

$60.00

C Scale, Steel, Rockwell Regular Hardness Test Block, Used with Penetrator C Diamond, with Load of 1..

Quickview

D Scale, Steel, Rockwell Regular Hardness Test Block

$60.00

D Scale, Steel, Rockwell Regular Hardness Test Block, Used with Penetrator C Diamond, with Load of 1..

Quickview

E Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

E Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/8 Ball, with Load of 10..

Quickview

F Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

F Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/16 Ball, with Load of 6..

Quickview

G Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

G Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/16 Ball, with Load of 1..

Quickview

G Scale, Steel, Rockwell Regular Hardness Test Block

$60.00

G Scale, Steel, Rockwell Regular Hardness Test Block, Used with Penetrator 1/16 Ball, with Load of 1..

Quickview

H Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

H Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/8 Ball, with Load of 60..

Quickview

K Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

K Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/8 Ball, with Load of 15..

Quickview

L Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

L Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/4 Ball, with Load of 60..

Quickview

M Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

M Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/4 Ball, with Load of 10..

Quickview

P Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

P Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/4 Ball, with Load of 15..

Quickview

R Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

R Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/2 Ball, with Load of 60..

Quickview

S Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

S Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/2 Ball, with Load of 10..

Quickview

V Scale, Brass, Rockwell Regular Hardness Test Block

$60.00

V Scale, Brass, Rockwell Regular Hardness Test Block, Used with Penetrator 1/2 Ball, with Load of 15..

Showing 1 to 19 of 19 (1 Pages)